Triaxial Cells
This series of Stress path Triaxial cells designed for advanced static and dynamic soil testing to test cylindrical soil specimens with diameters from 38mm up to 500 mm, a length/diameter ratio of at least 2 under triaxial conditions. The cells cover variety range of tests which is required in the geotechnical labs from 1MPa up to 50MPa.
The regular cells are in different series:
- > Conventional Aluminium Cell
- > Stainless Steel Triaxial cell
- > Large Size Triaxial Cell
- > High pressure Triaxial Cell
- > Temperature controlled triaxial cells
- > Active Triaxial cell
- Features
- Specifications
- Software
- Standards
- Applications
- For Static and cyclic triaxial tests
- Stiff Triaxial cell construction with specially adapted low friction piston seal
- Sample diameters from 38 mm up to 500 mm with height to diameter ratio of 2 to 2.5
- Large variety of Cell Pressure up to 50MPa
- Easy Assembly and set up of specimen
- Bottom and top plate with two ports for flushing, porewater or pore-air pressure
- Suitable to perform static and cyclic tests on specimen
- High-pressure electrical feed-through ports for all internal transducers, such as: In-vessel load cell ,In-vessel axial deformation measuring device, In-vessel radial deformation measuring device ,Bender element sensors(horizontal or vertical) and Temperature sensor
- 6 high quality no-volume change ball valves with quick couplings
- Exchangeable head and base plate for different sample dimensions
- Optional Extension test kit with suction cap
- Interchangeable pedestals and top caps for different sample sizes
- No need for access ring for internal sensors
- Optional Balance ram is available
|
Sample sizes |
From 38mm up to 500mm |
|
Cell pressure |
From 1 MPa up to 50 MPa |
|
Material of cell |
StainlessSteel |
|
Axial Load |
from 50kN up to 1000kN |
- Not available
- Not available
- Detailed information will follow soon